Drab to Fab Product Sponsor

Model: EVO-2212, EVO-RC-PLUS, DC-3500-KIT

Samlex America is a proud product sponsor and supporter of the RV Women’s Alliance "Drab to Fab" initiative. Samlex has donated an EVO-2212 Inverter/ ChargerEVO-RC-PLUS Remote, and DC-3500-KIT Inverter Installation Kit to provide reliable off-grid power for the many adventures ahead.

The “seen better days DRAB” 2007 Crossroads Zinger RV will be undergoing a top to bottom transformation by female volunteers with the best RV products and accessories available in the market. Once complete, the “off the charts FAB” RV will be raffled off to raise funds for RVWA, an organization dedicated to fostering the next generation of RV Industry leaders and innovators.

The EVO-2212 is a pure sine wave inverter, battery charger and transfer switch – all in ONE device. Power the comforts of home while dry camping with the EVOTM inverter/charger RV power system. The EVO Series advanced design includes a built in DC solar input on all units – allowing the installer to wire the solar system (from the charge controller) directly into the EVO, saving time and centralizing the power system.

To learn more call 1-800-561-5885 or download the Samlex EVOTM Brochure below.

Follow the Drab to Fab transformation on Facebook: 
@RV.Womens.Alliance @SamlexAmericaInc

Drab to Fab Product Sponsor
View Larger


AC Inputs

  • Two separate AC inputs – one for grid (priority #1), one for generator (priority #2), connect simultaneously, no need to reconfigure when different power sources are available.
  • Generator Input is specifically designed to have more tolerance for wave form distortion, prevents unnecessary “rejection of AC input and switch to inverter” by tolerating distorted wave forms that can be produced by gritty generators
  • Each AC input is programmable for voltage and frequency. User determines what the min and max thresholds are to switch from Grid or Generator to Inverter.
  • Generator start can be initiated by “Status Relay” contact, can be programmed to activate when grid is lost.

Solar Input

  • Connect a solar charge controller directly to the EVOTM though the Battery Charger external DC Input, seamlessly integrates solar charging into the EVO’s power system.
  • ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those wishing to operate primarily on solar power (when the grid is available, but might be costly).

Battery Charger

  • 3 or 4 stage charging with Equalization (must be manually initiated). 
  • Adaptive algorithm is used during Bulk to assess the condition of the battery. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for Absorption and Float. Prevents unnecessary charging, extends the life of batteries.
  • Programmable – set battery voltage thresholds to initiate charging.

Transfer Switch

  • Zero transfer time when switching from Inverter to Grid. When grid comes on, the inverter synchronizes with the wave form and then transfers instantly at zero crossing.
  • <16ms transfer when going from Grid to Inverter. When grid is lost, the transfer relay switches to inverter at the correct place in the wave form, the transfer takes less than 16ms.

Surge Capacity (Power Boost)

  • The EVOTM has 3X surge power
  • Additionally, the EVOTM has large power overload allowances available for long periods of time. Increased inverter capacity means you can size your inverter smaller to handle heavy surge loads, reducing costs.

State-of-the-Art Technology

  • The EVOTM operates at 165 million instructions per second producing lightning fast load and response times
  • The EVOTM is practically indestructible. It has “Bullet-Proof Intelligence” in the form of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. The EVOTM will detect fault conditions and initiate a healthy shutdown before any product damage can be done.
  • The EVOTM uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.


  • The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data. Records all detected faults and the conditions leading up to them. Data is stored on a removable 32GB SD Card (in the remote). Use data to analyze trends for more efficient use of system resources


  • Connect the EVO to the battery bank with our DC-3500-Kit Inverter Installation Kit: heavy-duty cables and fuse assembly provide a safe and easy plug and play connection.

Input12 VDC
Output120 VAC
Watts2200 Watts
Surge6600 Watts
Weight59 lbs
Weight27 kg
Safety ETL safety listed to stringent UL standards: 1741, 458, and to CSA C22.2 No. 107.1-01. EMI/EMC compliant with FCC Part 15(B), Class A and RoHS Compliant.
Warranty3 Year Limited
  • Boats, RVs, trucks, specialty vehicles
  • Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
  • Back-up and emergency power applications