|
|
|
|
900-RC
900-RC Remote Control for the SEC-1245A, SEC-1260A, SEC-1280A, SEC-2425A, & SEC-2440A battery chargers
900-RC Remote Control comes with 10 metres of flat ribbon cable that has 8 position modular male connector on either end.
The Remote Panel can be used to switch on / switch off the charger and also monitor the charging status of the charger from a remote location.
|
|
SEC-1215A
SEC-1215A - 12 Volt, 15 Amp Battery Charger
New Look for 2010! This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload and short-circuit protection. The unit allows charging of up-to 3 separate battery banks.
|
|
SEC-1230A
SEC-1230A - 12 Volt, 30 Amp Battery Charger
New Look for 2010! This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
|
|
SEC-1260A
SEC-1260A - 12 Volt, 60 Amp Battery Charger
New Look for 2010! This advanced fully automatic three-stage 60 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
|
|
SEC-1280A
SEC-1280A - 12 Volt, 80 Amp Battery Charger
New Look for 2010! This advanced fully automatic three-stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
|
|
SEC-2415A
SEC-2415A - 24 Volt, 15 Amp Battery Charger
New Look for 2010! This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
|
|
SEC-2440A
SEC-2440A - 24 Volt, 40 Amp Battery Charger
New Look for 2010! This advanced fully automatic three-stage 40 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
|
|
SEC-1245A
SEC-1245A - 12 Volt, 45 Amp IUOU Battery Charger
New Look for 2010! This advanced fully automatic three-stage 45 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit, and reverse polarity and thermal overload protection. The unit allows charging of up-to 2 separate battery banks.
|
|
|
SEC-2425A
SEC-2425A - 24 Volt, 25 Amp IUOU Battery Charger
New Look for 2010! This advanced fully automatic three-stage 25 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit, reverse polarity and thermal overload protection. The unit allows charging of up-to 2 separate battery banks.
|
|
ESC-120-C
ESC-120-C 108 Watt Desktop Charger
To order evaluation samples, please contact us @ 1-800-561-5885 or 604-525-3836
Canadian customers please call for a list of authorized distributors
|
|
|
ESC-240-C
ESC-240-C 216 Watt Desktop Charger
To order evaluation samples, please contact us @ 1-800-561-5885 or 604-525-3836
Canadian customers please call for a list of authorized distributors
|
|
|
|
|
